Vodavi nomad IP User's Guide download pdf (Page 20)

16 Installation and Setup

Nomad SP Station User Guide October 2007

Registration in an XTS-IP/XTSc-IP System

Nomad SP Lock-key

Provide Inside Sales with the serial number of your MPB (use feature code 609

to view the serial number). The Vodavi Inside Sales Department

representatives will issue the lock-key code. Prior to registration of the Nomad

SP with the host XTS-IP/XTSc-IP system, the host XTS-IP/XTSc-IP system will

require installation of the Nomad SP software lock-key. This is accomplished

by the XTS-IP/XTSc-IP system administrator using HyperTerminal and the

following steps.

1. Open HyperTerminal on port 1 and enter the following settings:

Bits per second: 19,200

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

2. Upon getting a password prompt, enter maintenance by typing config

and pressing <Enter>.

3. Type S and press <Enter> to show licensing.

4. Type SF and type the lock-key code (no space between SF and the

code).

Nomad SP User ID and Password

The Nomad SP User ID and Password does not apply to XTS-IP/XTSc-IP

systems; however, a User ID and Password entry must be used during the

station number for both ID and Password.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

No comments

Vodavi nomad IP User's Guide Page 20