Vodavi XTS-IP Technical Information download pdf (Page 492)

C-28 Quick Start Procedure

Appendix C - Networking Systems

Conference

When a conference is established between several extensions, either local or remote, the

display will show the following message:

Quick Start Procedure

Networking uses PRI cards for connecting the systems together; however the telco circuit is a

point-to-point T1, not a PRI. Most telco circuits will reverse the transmit and receive pairs

fromendtoend,soitisimportantthatthisiscorrectedbyswappingtransmitandreceiveat

the hub network PRI(s). The connection should end up as straight through from hub to

node(s).

Enable LCR on all systems for outbound dialing. (See the LCR programming section of this

Quick Start procedure)

Extension range 9000-9999 is reserved for speed dial.

Programming

Flash 09 – System Parameters

Button #8 - Identify system node (1-16)

Each system in the network must be identified e.g., Hub is always system Node 1, the first

Node is system Node 2, the second Node is system Node 3, etc.

Button #9 – Enter leading digit (0-8)

Each system needs it’s own numbering plan. This will place leading digit before all 3-digit

codes, 2-digit codes are not affected. Example: Hub numbers are 1000’s, so enter 1 HOLD.

Flash 16 – Network tables

Select table number (Table 01 will always contain the numbering plan for the system you are

programming and will use CO group 00 (internal)). CO group 01 is reserved for outdialing

and dial ‘9’ access.

Button #1 – Select CO group (group assigned to network PRIB)

Button #2 – Station range START (1000-8999)

Button #3 – Station range END (1000-8999)

Button #5 – External BLF (1-9) This is programmed at the Hub only. You identify the PRIB slot

locations in the Hub that are associated with each Node in the network, other than the node

being defined by the table number you are programming. You do not identify External BLF

slot locations in the Node(s) programming because the Hub controls passing of this

information. If you only have 1 Node you do not have to program the external BLF. All

unused tables must be programmed for CO group 00 and contain the entire numbering

range (1000-8999). This will prevent any invalid numbers from trying to dial across the

network, the system will check the networking tables in order before attempting to dial.

CONFERENCE

LINE 023 hh:mm:ss

1 2 ... 487 488 489 490 491 492 493 494 495 496 497 ... 625 626

Comments to this Manuals

Ilene 24 Apr 2024 | 18:24:25

One of the biggest, high traffic sites on the planet is Wikipedia. However, placing your backlinks on that site proves unsuccessful 99.9% of the time, making it almost impossible to siphon from the masses of daily visitors that they receive. What Matt and has team have very cleverly done, is uncover a ‘stealth-like’ strategy that allows you to link from Wikipedia directly to a site that YOU own. Giving you an AGED authority backlink, and a traffic hotspot in which to suck targeted traffic fro

Vodavi XTS-IP Technical Information Page 492

Comments to this Manuals

Related products and manuals for IP phones Vodavi XTS-IP