Vodavi XTS-IP Technical Information download pdf (Page 60)

2-30 Call Forward

Chapter 2 - Features and Operation

Conditions

»

If a Call Forward mode is currently active at the station where forwarding is desired, the

new forward becomes active and cancels the previous forward.

»

Both internal and external calls to the affected station forward to the designated location.

»

Call forwarding must be allowed in programming for the affected station.

»

When remote forward is activated, the forwarding is immediate.

»

A station’s Call Forward status is stored in a battery protected area of memory. A station’s

Call Forward status is returned after a power failure or system reset occurs.

»

When a key telephone is forwarded remotely, the key station’s forward button lights. The

station user may cancel the forwarding at their station by pressing ON/OFF, then the FWD

button. SLT users can cancel their forwarding by going off hook and dialing the forward

code.

»

DISA callers entering the code and making a mistake are given error tone for 3 seconds,

silence for 2 seconds, then the dial tone is returned.

Call Forward - No Answer

Description

The Call Forward No Answer feature allows a station the ability to have their calls forwarded

to a designated station, an ACD or UCD group pilot number, Voice Mail group number or

Hunt group number when there is no answer at the station. No answer calls forward when

the system-wide no answer timer expires.

Operation

To activate No Answer Call Forwarding:

1. Lift the handset or press ON/OFF button.

2. Press the FWD button or dial [640] on the dial pad.

3. Dial the Call Forward No-Answer code [7] on the dial pad.

4. Dial the desired destination number where calls are to be forwarded. A confirmation tone

sounds.

5. Replace handset or press ON/OFF button.

To remove No Answer Call Forwarding:

1. Lift handset or press ON/OFF button.

2. Press the FWD button or dial either [640] or [662]. A confirmation tone sounds and the

FWD LED extinguishes.



SINGLE LINE TELEPHONE

The SLT operation uses the same procedures as used in Digital Telephone operation

described above, except there is no FWD button. The user must use the 640 feature code to

activate and 662 to clear.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 625 626

Comments to this Manuals

Ilene 24 Apr 2024 | 18:24:25

One of the biggest, high traffic sites on the planet is Wikipedia. However, placing your backlinks on that site proves unsuccessful 99.9% of the time, making it almost impossible to siphon from the masses of daily visitors that they receive. What Matt and has team have very cleverly done, is uncover a ‘stealth-like’ strategy that allows you to link from Wikipedia directly to a site that YOU own. Giving you an AGED authority backlink, and a traffic hotspot in which to suck targeted traffic fro